| |
PEGASUS POSAVELOX ACCESSORIES |
| |
|
|
|
|
| |
 |
|
|
| |
| |
|
|
|
| |
1 - Perimeter list
This is a wooden list that can be used as a base or post to position and align Pegasus Posavelox blocks to the wall. Package contains 4 wooden lists (5.7x2x150cm). |
|
|
| |
| |
|
|
|
| |
2 - Finishing Kit
The finishing kit is an optional accessory that can be used for full installation with perimeter strips. The package contains 2 raw wood skirting boards (1.1x6x300cm) to finish the base of the wall, and 2 raw wood U-shaped finishing frames (8x2.6x300cm) to finish flat-type walls where end blocks are not used. |
|
|
| |
| |
|
|
|
| |
3 - PVC kit
This is a white PVC coated wooden strip that can be used as a base or post for interiors and exteriors and in areas with high humidity as an alternative to the perimeter strip. It is available in 2 versions:
• 2cm-thick 8x2x300cm PVC list to use as a post (each box contains 2 PVC coated wooden strips);
• 6cm-thick 8x6x300cm PVC list to use as a base (each box contains 1 PVC coated wooden strip). |
|
|
| |
| |
|
|
|
| |
4 - Plastic Crosses
Each pack of Pegasus Posavelox blocks contains plastic aligning crosses to be used for walls that are smaller than 9m2. Inserting crosses in the grooves to be found in the frame between blocks means perfect alignment and no need to use supports. |
|
|
| |
| |
|
|
|
| |
5 - Iron bars
Iron bars are recommended for surfaces above 4m2. Thanks to them the blocks can be firmly joined to the support wall. Each pack contains 100 iron bars (0.6x0.6x15cm). |
|
|
| |
| |
|
|
|
| |
6 - Spacers for curved walls
These wooden spacers are used to create curves with a radius of 50cm, 100cm, 150cm and 200cm. Each pack contains 100 raw wood spacers. |
|
|
| |
| |
|
|
|
| |
7 - Superior Polyacetylvinyl Adhesive
When applied to the wooden frames surrounding Pegasus Posavelox blocks, this polyacetylvinyl adhesive firmly glues blocks to one another. Superior polyacetylvinyl adhesive is available in 0.5 kg packages. |
|
|
| |
| |
|
|
|
| |
8 - Cement based filler
At the end of the installation, the joints have to be finished with quick setting cement filler resistant to water and humidity. Finishing mortar is available in 2 versions (white or grey) and in 5 kg packages. |
|
|
| |
| |
|
|
|
| |
Installation with Finishing Kit |
|
Installation with perimeter list |
|
| |
 |
|
 |
|
|
| |
