|
| 1 | 2 | 3 |
1 - Free standing walls
2 - Walls connecting floor and ceiling
3 - Finishing
|
| 2 - WALLS CONNECTING FLOOR AND CEILING |
| |
 |
|
Measure the profiles.
Cut the profiles to size. |
| |
 |
|
Cut the tube to a diameter of 3 mm.
Glue the horizontal profile to the floor. |
| |
 |
|
|
|
|
|
|
|
|
Affix long profiles vertically (1 X 96,5cm and 1X0,5 cm – uniform load distribution).
Glass blocks must never be directly glued to each other using adhesives, always use short profiles in between blocks if using adhesives. |
|
| |
 |
|
On higher levels, stabilise lenghtwise and breadthwise with adhesive tape. |
| |
 |
|
Use metal brackets to join with ceiling.
Fix long metal brackets to alternate plastic profiles with adhesive tape. |
|
top
< back to General information |
| |
| For further information, please refer to Quickteck System brochure. |
