GENERAL INFORMATIONEasy, simple and quick installation system for glass blocks of the Basic line, perfect also for a un-expert user. To build up a wall with the Quicktech system you only need to glue the glass blocks to the system profiles.
The System allows the glass block installation with a reduced joint, therefore it is easier to fill the joints than with the traditional system. The walls finishing can be made with mortar (for straight and curved walls) or with silicon (only for straight walls).
QUICKTECH SYSTEM FOR STRAIGHT WALLS
The Quicktech system allows the combination of all the Basic line shapes: squared, rectangular, corner and end blocks. Each Quicktech kit contains the material needed to build a 1m² wall with 25 glass blocks of the Basic line.
The walls built up with the Quicktech system can reaches 3.50m high for walls connecting floor and ceiling, or 2.20m high by 1.40m length for free standing walls (fixed to the floor and the wall). Material for 1 m²:
2 x 300 ml tubes of Quicktech glue - 8 x 96.5cm profiles - 20 x 18cm profiles
QUICKTECH SYSTEM FOR CURVED WALLS
The Quicktech System allows the combination of the Basic line shapes: squared, rectangular, and end blocks. The internal joints are of 5mm thickness and the external vertical joints are 15mm thickness.
Each Quicktech kit contains the material needed to install 10 glass blocks (squared or rectangular) for curve walls that have 1.55m radius obtained with squared glass block, and 0.75m radius obtained with rectangular glass block.
The curved walls built up with the Quicktech System can reaches 2.50m high. Material included in the kit:
2 x 96,5cm profiles - 2 x 48cm profiles - 10 x 18cm profiles - 1 x 300ml Tubes Quicktech glue